Makerspace Nanaimo on YouTube: Laser engraving a ceramic tile (teaser) (20 seconds).Makerspace Nanaimo on YouTube: Making paper doilies with a laser cutter (Samples Laser Cut Projects done in the Makerspace. Focus Lens (1), diameter? focal length?.Cart / Stand (4'W x 3'D x 2'H) (built by Ken K).File:POWERGAUGE-V1-instuctions-version2.pdf.Laser power meter - received 0-200W laser power meter 'POWERGAUGE V1' from eBay seller ukemm_qewpbhg.1 pair received with laser cutter (dark lenses), 2 pair of laser safety glasses from eBay sellers.VIVOSUN 6 Inch 440 CFM Inline Duct Ventilation Fan with Variable Speed Controller, 2450RPM, 120VAC, 1.1A.SW 6 OFF, SW 7 OFF, SW 8 OFF ->32 microstepping, 6400 pulse/rev.SW 1 ON, SW 2 OFF, SW 3 OFF, SW 4 ON -> 0.7A peak current.Lihuiyu Studio Labs M415DRV stepper motor drivers for X & Y axis.MGN12 linear rail on X-axis, 1060 mm long.Focal lens (diameter 20mm, focal length 63.5mm(2.5')).SW 5 OFF, SW 6 ON, SW 7 OFF, SW 8 ON ->6400 steps per revolution.SW 1 OFF, SW 2 OFF, SW 3 OFF -> 5.6A peak current.2DM542-06 stepper motor driver for Z axis.Lifting platform (200 mm) honeycomb work table.RDWorksLab operator's manual for RDWorks (Good English documentation for RDWorks software):.RDWorks v8 Software Manual: 404 now! (2022-Sept).

Ruida English site downloads (includes RDImage) 404 now! (2022-Sept).

HL-1060 RDworks software download: 404 now! (2022-Sept).

75% power setting draws 25mA (measured), 7% power setting is minimum to raster etch paper, so power in RDWorks 'vendor settings' (password-protected) NOT TO BE MODIFIED BY USER was set to Min: 7%, Max: 75% in vendor settings.

The life span can reach 8,000 hours if the current is kept below 25mA.'

'The running current must be kept below 27mA.

Model: HL-ZXP 1060 100W (975 mm x 600 mm working area).

If any concerns or questions, please contact the Laser Cutter Team.

6.2 Manufacturer Youtube Channels (lots of projects).

4.1 Laser Cut Projects done in the Makerspace.

Lihuiyu studio lab software